TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Connect the connector to the tire pressure warning ECU and receiver.

    2. A005DO6

      Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

    3. Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  3. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Upper Side)

    Click here

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  5. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Lower Side)

    Click here

  6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  8. INSTALL NO. 2 CUP HOLDER

    Click here

  9. INSTALL FRONT DECK SIDE TRIM COVER LH

    Click here

  10. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  11. INSTALL NO. 1 DECK TRIM COVER

    Click here

  12. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  13. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  14. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  15. INSTALL BACK DOOR SCUFF PLATE

    Click here

  16. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  17. INSTALL REAR DECK FLOOR BOX

    Click here

  18. INSTALL NO. 1 DECK BOARD

    Click here

  19. INSTALL NO. 2 DECK BOARD

    Click here

  20. INSTALL DECK BOARD ASSEMBLY

    Click here

  21. REGISTER TRANSMITTER ID

    Click here

  22. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  23. PERFORM INITIALIZATION

    Click here