HEATER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01DY2GE01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01DZ7ME01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    A01DYUR

    1. Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.

  3. REMOVE SWITCH BASE

    A01DVIR

    1. Detach the 8 claws.

      Tech Tips

      If the claws are difficult to detach, detach the claws from the back of the switch base.

    2. Disconnect the connectors and remove the switch base..

  4. REMOVE HEATER SWITCH ASSEMBLY

    A01DW8F

    1. Disconnect the connector.

    2. Detach the 2 claws and remove the heater switch assembly.