OIL COOLER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick hereClick hereClick here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick hereClick hereClick here).

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  5. REMOVE REAR ENGINE UNDER COVER LH

    Click hereClick hereClick here

  6. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  7. REMOVE BATTERY

  8. REMOVE BATTERY TRAY

  9. DISCONNECT RADIATOR HOSE SUB-ASSEMBLY

    Click here

  10. REMOVE FRONT BATTERY BRACKET

    Click here

  11. REMOVE BATTERY BRACKET REINFORCEMENT

    Click here

  12. DRAIN ENGINE COOLANT

    Click here

  13. REMOVE TRANSMISSION OIL COOLER HOSE ASSEMBLY

    C281579C01

    *1

    Oil Cooler Inlet Hose

    *2

    Oil Cooler Outlet Hose

    *3

    Oil Cooler

    *4

    Transmission Oil Cooler Hose

    *5

    Oil Cooler Tube

    1. Slide the 4 clips and disconnect the 2 oil cooler inlet hoses and 2 oil cooler outlet hoses from the transaxle and oil cooler.

    2. Slide the 2 clips and disconnect the 2 transmission oil cooler hoses from the oil cooler tube.

    3. C281580C01

      *1

      Oil Cooler Inlet Tube

      *2

      Oil Cooler Outlet Tube

      Slide the 4 clips and disconnect the 2 oil cooler inlet hoses and 2 oil cooler outlet hoses from the oil cooler inlet tube and oil cooler outlet tube.

    4. Slide the 2 clips and disconnect the oil cooler inlet tube and oil cooler outlet tube from the transmission oil cooler hose assembly.

  14. REMOVE OIL COOLER TUBE SUB-ASSEMBLY

    C201429

    1. Slide the 4 clips and disconnect the No. 3 oil cooler inlet hose and No. 3 oil cooler outlet hose from the radiator and oil cooler tube.

    2. Remove the 2 bolts and oil cooler tube aqssembly from the radiator assembly.

  15. REMOVE OIL COOLER

    C201430

    1. Slide the 2 clips and disconnect the 2 water by-pass hoses from the oil cooler.

    2. C201453

      Remove the 3 bolts and oil cooler from the continuously variable transaxle assembly.