PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01DV2WE33

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Shift Lever Position Specified Condition
      4 (B) - 5 (L) Shift lever in P or N Below 1 Ω
      4 (B) - 5 (L) Shift lever not in P or N 10 kΩ or higher
      1 (RL) - 2 (RB) Shift lever in R Below 1 Ω
      1 (RL) - 2 (RB) Shift lever not in R 10 kΩ or higher
      2 (RB) - 7 (DL) Shift lever in D Below 1 Ω
      2 (RB) - 7 (DL) Shift lever not in D 10 kΩ or higher
      2 (RB) - 3 (2L) Shift lever in 2 Below 1 Ω
      2 (RB) - 3 (2L) Shift lever not in 2 10 kΩ or higher
      2 (RB) - 8 (LL) Shift lever in L Below 1 Ω
      2 (RB) - 8 (LL) Shift lever not in L 10 kΩ or higher

      If the result is not as specified, replace the switch assembly.