THROTTLE BODY REMOVAL

PROCEDURE

  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

    1. A352544C02

      *1

      No. 1 Water By-pass Hose

      *2

      No. 2 Water By-pass Hose

      Disconnect the throttle body with motor assembly connector.

    2. Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the throttle body with motor assembly.

    3. A352545

      Remove the 2 bolts and 2 nuts.

    4. A353242

      Using an E6 "TORX" socket wrench, remove the 2 stud bolts.

      Note:

      Do not drop the throttle body with motor assembly.

    5. Separate the intercooler assembly and remove the throttle body with motor assembly from the intake manifold.

      Note:

      If the throttle body with motor assembly has been struck or dropped, replace it.

  3. REMOVE THROTTLE BODY GASKET

    1. A353751C02

      *a

      Intercooler Assembly Side

      *b

      Intake Manifold Side

      Remove the throttle body gasket from the intercooler assembly.

    2. Remove the throttle body gasket from the intake manifold.