OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER


    1. A004T7B

      Remove the 8 clips and fold back the engine under cover.

      Tech Tips

      It is not necessary to fully remove the engine under cover. Partially remove it so that the oil can be replaced in a later step.

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch connector.

    2. A004SO6

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.