TRANSMITTER BATTERY(w/o Smart Entry and Start System) REMOVAL

PROCEDURE


  1. REMOVE TRANSMITTER BATTERY


    1. B004NAQC01
      *a Protective Tape

      Insert a screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B004I38C01
      B00847Z Remove in this Direction

      Remove the transmitter battery housing cover as shown in the illustration.

    3. B004HOAC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032) as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.