DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. for Outside:


      1. A01HGJHC01
        *a Protective Tape

        Using a screwdriver with its tip wrapped with protective tape, pry out the front drive shaft oil seal RH from the automatic transaxle assembly.

        Note

        Be careful not to damage the transaxle housing.

        Tech Tips

        Tape the screwdriver tip before use.

    2. for Inside:


      1. A01HDS7N03

        Using SST, remove the front drive shaft oil seal RH from the front differential case.

        SST
        09308-00010

        Note

        Be careful not to damage the front differential case.

  3. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. for Inside:


      1. A01HIFTN02

        Coat the lip of a new front drive shaft oil seal RH with MP grease.

      2. Using SST and a hammer, install the front drive shaft oil seal RH to the front differential case.

        SST
        09950-60010   ( 09951-00410 )
        09950-70010   ( 09951-07200 )
        Standard Depth
        21.5 to 22.5 mm (0.847 to 0.885 in.)

        Note

        Do not damage the front drive shaft oil seal RH lip.

    2. for Outside:


      1. Coat the lip of a new front drive shaft oil seal RH with MP grease.

      2. A01HIFKN02

        Using SST and a hammer, install the front drive shaft oil seal RH to the automatic transaxle assembly.

        SST
        09649-17010
        09950-70010   ( 09951-07200 )
        Standard Depth
        5.5 to 6.5 mm (0.217 to 0.255 in.)

        Note


        • Make sure that the front drive shaft oil seal RH is installed in the correct direction.

        • Do not damage the front drive shaft oil seal RH lip.

  4. INSTALL TRANSFER ASSEMBLY

    Click here