WASHER NOZZLE REMOVAL

PROCEDURE

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    Tip:

    Use the same procedure for both washer nozzle sub-assemblies.

    1. E268402C01

      *1

      Protective Tape

      Using a screwdriver, detach the 2 claws and remove the washer nozzle sub-assembly as shown in the illustration.

      Note:

      Be careful not to damage the windshield.

      Tip:

      Tape the screwdriver tip before use.

    2. E268403

      Disconnect the washer nozzle sub-assembly from the washer hose.

      Note:

      Washer nozzle sub-assemblies cannot be reused.