IMMOBILISER SYSTEM(w/o Entry and Start System) DIAGNOSIS SYSTEM

  1. DESCRIPTION

    1. The transponder key ECU assembly controls the immobiliser system. Immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3).

  2. CHECK DLC3

    1. Check the DLC3.

      Click here

  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery.