FUEL PUMP(w/o Canister Pump Module) REASSEMBLY

CAUTION / NOTICE / HINT

Note:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

Tip:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click here

PROCEDURE

  1. INSTALL FUEL PUMP

    Tip:

    Perform "Inspection After Repairs" after replacing the fuel pump.

    Click here

    1. A197087C02

      *1

      Fuel Pump Spacer

      *2

      New O-Ring

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

    2. Connect the fuel pump connector.

    3. Attach the 5 claws to the holes to install the fuel pump.

  2. INSTALL NO. 1 FUEL SUCTION SUPPORT

    1. Attach the 2 claws to the holes to install the No. 1 fuel suction support.

  3. INSTALL NO. 1 FUEL SUB-TANK

    1. Apply gasoline to a new O-ring and install it to the jet pump.

    2. A130453

      Install the jet pump while aligning it with the installation position on the No. 1 fuel sub-tank.

    3. Install the jet pump nozzle.

    4. Attach the 2 claws to the holes to install the No. 1 fuel sub-tank.

    5. Connect the wire harness connector.

    6. Install the 2 springs to the fuel suction plate, and then install them to No. 1 fuel sub-tank.

    7. Install a new E-ring.

      Tip:

      Slightly lower the fuel suction plate to install the E-ring.