QUARTER WINDOW GLASS REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE ROOF HEADLINING ASSEMBLY

   1. Remove the roof headlining (Click here).

2. REMOVE NO. 1 ROOF SIDE RAIL GARNISH LH

   

   *1

   Clip A

   1. Detach the 3 clips.

   2. Cut off clip A.

   3. Remove the roof side rail garnish.

   4. Remove clip A from the vehicle body.

3. REMOVE QUARTER WINDOW ASSEMBLY LH

   

   *1	Protective Tape
   *2	Piano Wire

   Tip:

   Apply protective tape to the outer surface of the vehicle body to prevent scratches.

   Note:

   When separating the quarter window glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.

   1. From the interior, insert a piano wire between the vehicle body and quarter window glass as shown in the illustration.

   2. 

      *1	Piano Wire
      *2	Wooden Blocks
      *3	Protective Tape

      Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   3. Cut through the adhesive by pulling the piano wire around the quarter window glass.

      Note:

      Leave as much adhesive on the vehicle body as possible when removing the quarter window glass.

   4. Using suction cups, remove the quarter window glass.

4. CLEAN VEHICLE BODY

   

   *1	Adhesive
   *2	Vehicle Body

   1. Clean and shape the contact surface of the vehicle body.

      1. On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

         Tip:

         Leave as much adhesive on the vehicle body as possible.

         Note:

         Be careful not to damage the vehicle body.

      2. Clean the contact surface of the vehicle body with cleaner.

         Tip:

         Even if all the adhesive has been removed, clean the vehicle body.