STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY(for Hatchback, Wagon) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL ECO RUN CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY)

    1. Engage the 4 claws to install the eco run cancel switch assembly (combination switch assembly) to the upper console panel.

  2. INSTALL UPPER CONSOLE PANEL

    Click here

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for CVT)

    Click here

  5. INSTALL SHIFTING HOLE BEZEL (for Manual Transaxle)

    Click here

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

    Click here

  8. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here