MICROPHONE REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY (except Glass Roof)

    Click here

  2. REMOVE MAP LIGHT ASSEMBLY (for Glass Roof)

    Click here

  3. REMOVE TELEPHONE MICROPHONE ASSEMBLY (except Glass Roof)


    1. w/o Intrusion Sensor:


      1. A005EV3

        Remove the 8 screws.

      2. Disconnect the connector and remove the board and cover.

    2. w/ Intrusion Sensor:


      1. A005EY4

        Remove the 8 screws.

      2. Disconnect the 2 connectors and remove the board and cover.

    3. A005E5N

      Remove the microphone holder with telephone microphone assembly.

    4. A005A6X

      Disengage the 2 claws and remove the telephone microphone assembly from the microphone holder.

  4. REMOVE TELEPHONE MICROPHONE ASSEMBLY (for Glass Roof)


    1. w/o Intrusion Sensor:


      1. A005ETO

        Remove the 8 screws.

      2. Disconnect the connector and remove the board and cover.

    2. w/ Intrusion Sensor:


      1. A005CBI

        Remove the 8 screws.

      2. Disconnect the 2 connectors and remove the board and cover.

    3. A005BF2

      Remove the 2 screws, knob guide with telephone microphone assembly.

    4. A005AFU

      Disengage the 2 claws and remove the telephone microphone assembly from the knob guide.

  5. REMOVE AMPLIFIER MICROPHONE ASSEMBLY


    1. A005E3G

      Disconnect the connector and remove the amplifier microphone assembly from the wire.