BACK-UP LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER


    1. A01RD14

      Disengage the 5 guides to remove the No. 3 back door service hole cover.

  2. REMOVE BACK-UP LIGHT BULB


    1. A01RCVGC01
      B007Z37 Remove in this Direction

      Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the back-up light bulb from the back-up light socket and wire.

  3. INSTALL BACK-UP LIGHT BULB


    1. Install the back-up light bulb to the back-up light socket and wire.

    2. A01RCYNC01
      B007Z37 Install in this Direction

      Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.

  4. INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER


    1. A01RD14

      Engage the 5 guides to install the No. 3 back door service hole cover.