REAR DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A001XL7C01
      B008LJK Install in this Direction

      Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH

    Click here

  3. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

    Click here

  4. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. A001V92

      Connect the rear door opening trim weatherstrip to the area shown in the illustration.

  5. INSTALL REAR DOOR SCUFF PLATE

    Click here

  6. INSTALL REAR SEAT ASSEMBLY

    Click here