OIL PAN REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER

   Click here

2. REMOVE REAR ENGINE UNDER COVER LH

   Click hereClick hereClick here

3. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

   1. 

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

   2. 

      *1	No. 1 Transmission Oil Filler Tube

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the transaxle oil pan sub-assembly and drain the continuously variable transaxle fluid.

4. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY

   1. 

      Remove the 19 bolts and transaxle oil pan sub-assembly from the continuously variable transaxle assembly.

      Note:

      Some fluid will remain in the transaxle oil pan sub-assembly. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and transaxle oil pan sub-assembly.

   2. Remove the gasket from the transaxle oil pan sub-assembly.

   3. Remove the 3 magnets from the transaxle oil pan sub-assembly.

      Note:

      • Clean the oil pan and remove any metal particles, sludge, etc.

      • Clean off any metal particles that adhere to the magnets.