STOP AND START SYSTEM(for 1AD-FTV) Stop and Start System does not Operate (During PM Regeneration)

DTC Code DTC Name
Stop and Start System does not Operate (During PM Regeneration)

DESCRIPTION

Check whether stop and start control is prohibited based on the PM regeneration conditions.

Tip:

Stop and start control is prohibited when the DPF warning light is illuminated (PM accumulation is close to the limit)

(Normally, the stop and start control is permitted during PM regeneration)

PROCEDURE

  1. CHECK COMBINATION METER ASSEMBLY (DPF WARNING LIGHT)

    1. Check the illumination condition of the DPF warning light.

      Result

      Proceed to

      Not illuminated

      Illuminated
    Not illuminated

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here

    Illuminated

    END (DRIVE VEHICLE UNTIL PM REGENERATION IS COMPLETE)