ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   1. Install a new gasket onto the engine coolant temperature sensor.

   2. Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      19.6 N*m

      200 kgf*cm

      14 ft.*lbf

      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

      Tip:

      Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

      Click here

   3. Connect the connector of the engine coolant temperature sensor.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click hereClick hereClick hereClick here

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. ADD ENGINE COOLANT

   Click here

5. INSPECT FOR ENGINE COOLANT LEAK

   Click here

6. INSTALL NO. 1 ENGINE COVER

   Click hereClick hereClick hereClick here