REAR SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE

Tip:

  • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name

Symbol

Name

Hole Diameter

mm (in.)

A, a

Rear Suspension Crossmember Installation Hole

φ24 (0.94)

B, b

Rear Suspension No. 1 Lower Arm Installation Hole

φ12.2 (0.48)

C, c

Rear Suspension Upper Arm Installation Hole

φ12.2 (0.48)

D, d

Stabilizer Bracket Installation Nut

M12 (0.47)

E, e

Rear Suspension No. 2 Lower Arm Installation Hole

23.1X14.2

(0.91X0.56)

F, f

Rear Suspension Crossmember Installation Hole

φ24 (0.94)
K138069C01

*A

FRONT

*B

LH

*C

RH

-

-

*a

mm

(in.)

-

-
K138070C01

*A

LH

*B

RH

*a

Imaginary Datum Line

*b

Height from Imaginary Datum Line

*c

mm

(in.)

-

-