ADOPTED COLOR / WORK NOTICE AND PRECAUTIONS TWO-TONE PAINT


  1. TWO-TONE PAINT DESCRIPTION


    1. Two-tone paint is applied as indicated in the figure below.

      B0023VXC01
      *A Paint Film Configuration - -
      *a Vehicle Upper Body *b Vehicle Lower Body
      B002405 Painted Area B0023SE Clear Coating
      B00242O Paint Color (1) B0023ZA Paint Color (2)

      Tech Tips

      The paint film level is uneven along the border.

    2. Before repairing paint, check the indicated values for the border in the next section and apply paint accordingly.

  2. QUARTER PANEL AREA


    1. Indicated Values for Border

      B0023Z8C01
      *a Standard position for measurements *b Borderline
      *c Measurement Point Datum *d 100 mm (3.94 in.)
      *e 2 mm (0.08 in.) *f 5 mm (0.20 in.)
      *g 12 mm (0.47 in.) *h 21 mm (0.83 in.)
      *i 34 mm (1.34 in.) *j 48.5 mm (1.91 in.)
      *k 70 mm (2.76 in.) *l 90 mm (3.54 in.)
      *m 100 mm (3.94 in.) *n 190 mm (7.48 in.)
      *o 190 mm (7.48 in.) - -

      Note


      • Align the tip edge of the ruler with the edge face of the quarter panel.

      • Align your line of sight straight along the quarter panel edge face when checking.

        B0023RHC01
        *1 Edge Face of Quarter Panel - -
        *a Under-Looking *b Over-Looking
        B00242O Ruler - -

      • Set the ruler so that it is perpendicular against the reference measurement position and measure the indicated value of the border.

        B0023X8C01
        *a Standard position for measurements *b Borderline
        *c Measure with Ruler Perpendicular - -
        B00242O Ruler - -

  3. REAR WINDOW GLASS INSTALLATION AREA


    1. Indicated Values for Border

      B0023S3C01
      *a 5 mm (0.20 in.) *b 9 mm (0.35 in.)
      B0083A5 Borderline (Set the border within this range) - -

  4. DOOR OPENING AREA


    1. Indicated Values for Border

      B0023UYC01
      *1 SIDE OUTER PANEL *2 ROOF DRIP SIDE MOULDING
      *a Borderline *b 10 mm (0.39 in.)
      *c Set the border along a level line that is not visible from the exterior - -

      Note

      Set the ruler against the body so that there is no gap.

      B00241ZC01
      *1 SIDE OUTER PANEL *2 ROOF DRIP SIDE MOULDING
      B00242O Ruler - -

  5. FRONT WINDOW GLASS INSTALLATION AREA


    1. Indicated Values for Border

      B00244UC01
      *a 6 mm (0.24 in.) *b 15 mm (0.59 in.)
      B0083A5 Borderline (Set the border within this range) - -