CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE ROOF SPEAKER ASSEMBLY (for 24 Speakers, Rear Side)
REMOVE TELEPHONE MICROPHONE ASSEMBLY (for Sliding Roof)
REMOVE TELEPHONE MICROPHONE ASSEMBLY (for Panoramic Moon Roof)
REMOVE ACTIVE NOISE CONTROL MICROPHONE (for Front Side)
REMOVE ROOF SPEAKER GRILLE LH (for 24 Speakers)
Detach the claw and guide and remove the roof speaker grille LH.
REMOVE ROOF SPEAKER GRILLE RH (for 24 Speakers)
Tech Tips
Use the same procedure described for the LH side.
REMOVE MICROPHONE CASE LH (for 12 Speakers)
Detach the claw and remove the microphone case LH.
REMOVE MICROPHONE CASE RH (for 12 Speakers)
Tech Tips
Use the same procedure described for the LH side.
REMOVE ACTIVE NOISE CONTROL MICROPHONE (for Panoramic Moon Roof, Rear Side)
REMOVE REAR MICROPHONE CASE (for Panoramic Moon Roof)
Detach the claw and remove the rear microphone case.
REMOVE ROOF SPEAKER ASSEMBLY (for 24 Speakers, Rear Side)
REMOVE REAR SPEAKER GRILLE (for 24 Speakers)
Detach the claw and guide and remove the rear speaker grille.
Tech Tips
Use the same procedure for the opposite side.
REMOVE ROOF SIDE REGISTER BEZEL LH (w/ Rear Cooler)
Detach the claw and guide and remove the roof side register bezel LH.
REMOVE ROOF SIDE REGISTER BEZEL RH (w/ Rear Cooler)
Tech Tips
Use the same procedure described for the LH side.
REMOVE NO. 1 ROOF WIRE
|
Remove in this Direction |
Turn the visor connectors 90° counterclockwise and disconnect them from the roof headlining assembly.
for LHD, Sliding Roof:
Detach each clamp and each guide.
Remove each tape and No. 1 roof wire from the roof headlining.
| *A | w/o Pre-collision | *B | w/ Pre-collision |
| *C | for 24 Speakers | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
for LHD, Panoramic Moon Roof:
Detach each clamp and each guide.
Remove each tape and No. 1 roof wire from the roof headlining.
| *A | for 24 Speakers | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
for RHD:
Detach each clamp and each guide.
Remove each tape and No. 1 roof wire from the roof headlining.
| *A | w/o Pre-collision | *B | w/ Pre-collision |
| *C | for 24 Speakers | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |