COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. B006BZF

      Connect the 2 connectors and attach the wire harness clamp.

    2. except Sport Package:


      1. B006BXJC01
        B006DHE Install in this Direction

        Insert the pin and set the combination meter assembly in the direction of the arrow shown in the illustration.

      2. B006G7TC02
        *A w/ Illumination

        Install the combination meter assembly with the 4 screws.

      3. w/ Illumination:

        Attach the clamp.

      4. Attach the clamp.

    3. for Sport Package:


      1. B006CP5C01
        B006DHE Install in this Direction

        Insert the pin and set the combination meter assembly in the direction of the arrow shown in the illustration.

      2. B006D21

        Install the combination meter assembly with the 4 screws.

      3. Attach the clamp.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. B006AXF

      Connect the connector.

    2. B006A2VC01
      *A except Sport Package, w/ Illumination:
      B006DHE Install in this Direction

      Insert the guide and attach the clip to install the instrument cluster finish panel assembly in the direction of the arrow shown in the illustration.

    3. except Sport Package, w/ Illumination:


      1. Connect the connector.

    4. B006BG3C01
      B006DHE Install in this Direction

      Push the direction of the arrow in the illustration to insert the guide and attach the guide.

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  8. INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

    Click here

  9. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  10. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  11. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM


    1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Click here