FRONT BUMPER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. B005Z23

      Remove the 3 clips.

    2. Disengage the 3 guides and remove the radiator support opening cover.

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. B005YOK

      Apply protective tape around the front bumper assembly as shown in the illustration.

      Text in Illustration
      B005XMV Protective Tape

    2. w/ Pre-collision System:


      1. Disconnect the connector.

    3. B005XQL

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. B005Z1N

      Remove the 6 screws.

    5. B005YEJ

      Using a clip remover, remove the 3 clips.

    6. Remove the 4 bolts.

    7. B005YKF

      Disengage the 2 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. Disconnect each connector.

    9. B005Z7J

      Remove the front bumper assembly as shown in the illustration.