RADIO RECEIVER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)

   
   

   1. Install the No. 2 radio bracket with the 3 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

2. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)

   
   

   1. Install the No. 2 radio receiver bracket with the 3 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

3. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)

   
   

   1. Install the No. 1 radio bracket with the 3 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

4. INSTALL NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)

   
   

   1. Install the No. 1 radio receiver bracket with the 3 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

   
   

   1. for Radio Receiver Type:

      
      

      1. Attach the claw to install the air conditioning control assembly with the 2 screws.

         Torque:

         4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

   2. for Radio and Display Type:

      
      

      1. Attach the claw and 2 guides to install the air conditioning control assembly with the 2 screws.

         Torque:

         4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

6. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   
   

   1. Connect the connectors.

   2. 

      Insert the radio receiver assembly with bracket to attach the 2 clips on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

   3. Install the radio receiver assembly with bracket with the 4 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

   
   

   1. Connect the connectors.

   2. 

      Insert the radio and display receiver assembly with bracket to attach the 6 clips its backside.

      Note

      When inserting the radio and display receiver, do not press the knobs on it.

   3. Install the radio and display receiver assembly with bracket with the 4 screws.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.