TIRE PRESSURE WARNING SYSTEM, Diagnostic DTC:C2176/76

DTC Code DTC Name
C2176/76 Receiver Error

DESCRIPTION

Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C2176/76

Receiver Error

Malfunction in the tire pressure warning ECU and receiver internal circuit

Tire pressure warning ECU and receiver

-

CAUTION / NOTICE / HINT

Note:

  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.

  • It is necessary to perform initializationClick hereafter registrationClick hereof the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

PROCEDURE

  1. CHECK DTC OUTPUT (C2176/76)

    1. Clear the DTCs.

      Click here

      Chassis > Tire Pressure Monitor > Clear DTCs

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ON and check for DTCs.

      Click here

      Chassis > Tire Pressure Monitor > Trouble Codes

      OK

      DTC C2176/76 is not output.

    Result

    Proceed to

    OK

    NG
    OK

    END

    NG

    REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER

    for Sedan:Click here

    for Wagon:Click here

    for Hatchback:Click here