GLOW PLUG REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY


    1. A004S1K

      Remove the 3 bolts, 2 nuts and No. 2 EGR pipe.

    2. Remove the 2 gaskets.

  5. REMOVE ENGINE COVER BRACKET


    1. A004MKN

      Remove the bolt, nut and engine cover bracket.

  6. DISCONNECT ENGINE WIRE


    1. A004OSH

      for DPF:

      Disconnect the glow connector.

    2. Remove the bolt and disconnect the engine wire so that the glow plugs can be removed in a later step.

  7. REMOVE NO. 1 GLOW PLUG CONNECTOR (for DPF)


    1. A004SKZ

      Remove the 4 grommets.

    2. A004ROG

      Detach the clamp from the bracket.

    3. A004RN5

      Remove the 4 nuts and No. 1 glow plug connector.

  8. REMOVE NO. 1 GLOW PLUG CONNECTOR (for CCo)


    1. A004SWE

      Remove the 5 grommets.

    2. A004U55E02
      Text in Illustration
      *1 Wire Harness

      Remove the nut and disconnect the wire harness.

    3. Remove the 4 nuts and No. 1 glow plug connector.

  9. REMOVE GLOW PLUG ASSEMBLY


    1. A004U7T

      Using a 10 mm deep socket wrench, remove the 4 glow plugs.