BRAKE PEDAL (w/o VSC) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE COMBINATION METER ASSEMBLY


    1. Remove the combination meter Click here.

  3. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. Disconnect the stop light switch connector.

    2. A01E2LME01

      Remove the return spring.

    3. Remove the clip and clevis pin.

    4. Disconnect the push rod clevis from the brake pedal.

  4. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY


    1. A01DZL0

      for 1KD-FTV and 2KD-FTV with Manual Transmission:

      Detach the connector clamp and clamp from the brake pedal support sub-assembly.

    2. A01DZGBE01

      Remove the bolt from the support.

    3. A01DVHU

      Remove the 4 nuts and support.