PARKING ASSIST ECU REMOVAL

PROCEDURE

1. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

   Click here

2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)

   Click here

4. REMOVE DECK BOARD ASSEMBLY (for Full Size Spare Tire)

   Click here

5. REMOVE REAR NO. 2 FLOOR BOARD

   Tip:

   Use the same procedure described for the rear No. 3 floor board side.

   Click here

6. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

7. REMOVE REAR DECK TRIM COVER (for Full Size Spare Tire)

   Click here

8. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

   1. w/o Spare Tire, for Compact Spare Tire:

      Click here

   2. for Full Size Spare Tire:

      Click here

9. REMOVE REAR SEAT ASSEMBLY (for RH Side)

   Click here

10. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

12. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

14. REMOVE PARKING ASSIST ECU

    1. 

       Loosen the temporary nut (A).

    2. Remove the 2 nuts.

    3. 

       Disconnect the 2 connectors and remove the parking assist ECU.