PROCEDURE
INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 3 parking brake cable assembly with the 5 bolts.
Install the No. 3 parking brake cable assembly to the parking brake plate sub-assembly with the bolt.
CONNECT PARKING BRAKE SHOE LEVER
INSTALL REAR FLOOR SIDE MEMBER COVER RH (for RH Side)
INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR
Install the front No. 2 floor heat insulator with the 3 nuts.
INSTALL FRONT EXHAUST PIPE ASSEMBLY
INSTALL NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY
| *1 | No. 1 Parking Brake Pull Rod Sub-assembly |
| *2 | No. 2 Parking Brake Cable Assembly |
| *3 | No. 3 Parking Brake Cable Assembly |
Connect the No. 3 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly as shown in the illustration.
Connect the No. 2 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly.
Tech Tips
Perform the same procedure as for the No. 3 parking brake cable assembly.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)
Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Bend the parking brake pedal claw.
Temporarily install the adjusting nut.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)
Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Bend the parking brake pedal claw.
Temporarily install the adjusting nut.
INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)
INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)