SEAT POSITION SENSOR ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the seat position airbag sensor.

PROCEDURE

  1. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision)

    1. Perform a diagnostic system check.

      Click here

  2. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)

    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the seat position airbag sensor installed on the vehicle.

      1. The defects are as follows:

        • Cracks on the sensor housing

        • Dents on the sensor housing

        • Chips on the sensor housing

        • Cracks or other damage to the connector

        • Peeling of the label

        OK

        No defects are found.

        Tip:

        If any of the defects is found, replace the seat position airbag sensor with a new one.