SOLAR SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE

  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (SOLAR SENSOR)

    1. Attach the 2 claws to install the automatic light control sensor (solar sensor).

    2. Connect the connector.

  2. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

    Click hereClick here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  4. CHECK SRS WARNING LIGHT

    Click here