DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA

Front Drive Shaft Assembly
Standard drive shaft length for LH Side 600.85 mm (1.97 ft.)
for RH Side (2WD) 925.55 mm (3.04 ft.)
for RH Side (AWD) 926.55 mm (3.04 ft.)
Standard grease capacity Outboard joint 81 to 91 g (2.86 to 3.20 oz)
Inboard joint 190 to 210 g (6.71 to 7.40 oz)
Rear Drive Shaft Assembly
Standard drive shaft length for LH Side 753.25 to 763.25 mm (2.48 to 2.50 ft.)
for RH Side 733.25 to 743.25 mm (2.41 to 2.43 ft.)
Standard grease capacity Outboard joint 50 to 60 g (1.77 to 2.11 oz)
Inboard joint 93 to 103 g (3.29 to 3.63 oz)
Propeller Shaft Assembly
Intermediate shaft assembly runout Maximum runout: 0.4 mm (0.0157 in.)
Universal joint flange runout (for Front Side) Maximum runout: 0.1 mm (0.00394 in.)
Universal joint flange runout (for Rear Side) Maximum runout: 0.1 mm (0.00394 in.)
Propeller shaft assembly runout Maximum runout: 0.4 mm (0.0157 in.)
Rear propeller shaft assembly runout Maximum runout: 0.4 mm (0.0157 in.)
No. 1 Joint Angle

-3.34° to -1.34° (for 8AR-FTS)

-3.02° to -1.02° (for 2GR-FKS)
No. 4 Joint Angle 0.85° to 2.85°
No. 2 center support bearing washer Thickness 3.2 mm (0.126 in.)
4.5 mm (0.177 in.)
6.5 mm (0.256 in.)
9.0 mm (0.354 in.)
11.0 mm (0.433 in.)
13.5 mm (0.531 in.)
15.5 mm (0.610 in.)
17.5 mm (0.689 in.)