КОРПУС КЛАПАНОВ В СБОРЕ УСТАНОВКА

PROCEDURE


  1. INSTALL MANUAL VALVE


    1. Coat the manual valve with ATF and install it to the transmission valve body assembly.

  2. INSTALL TRANSMISSION CASE GASKET


    1. Coat 2 new transmission case gaskets with ATF, and install them to the automatic transmission case sub-assembly.

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. B003N1XC02
      *1 Manual Valve Lever Sub-assembly
      *2 Manual Valve

      Insert the manual valve lever sub-assembly into the groove on the end of the manual valve and install the transmission valve body assembly to the automatic transmission case sub-assembly with the 12 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

      Tech Tips

      Bolt length


      • Bolt A: 25 mm (0.984 in.)

      • Bolt B: 36 mm (1.42 in.)

      • Bolt C: 50 mm (1.97 in.)

    2. Install the detent spring and detent spring cover to the transmission valve body assembly with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. Coat a new O-ring with ATF, and install it to the valve body oil strainer assembly.

    2. Install the valve body oil strainer assembly to the transmission valve body assembly with the 3 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. CONNECT TRANSMISSION WIRE

    Click here

  6. RESET MEMORY

    Note

    Perform Reset Memory (AT initialization) when replacing the transmission valve body assembly or any of the shift solenoid valves.

    for 1GD-FTV:

    Click here

    for 2GD-FTV:

    Click here

    for 2TR-FE:

    Click here

    for 1GR-FE:

    Click here