VANE PUMP(for 2KD-FTV) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

    Click here

  2. REMOVE FRONT FENDER APRON SEAL LH


    1. Detach the 6 clips and remove the front fender apron seal LH.

  3. DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE


    1. B00295T

      Slide the clip and disconnect the No. 1 oil reservoir to pump hose.

    2. Drain the power steering fluid.

  4. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    1. B00267O

      Using a union nut wrench, disconnect the pressure feed tube from the vane pump assembly.

  5. REMOVE VANE PUMP ASSEMBLY


    1. B0026UB

      Remove the 2 nuts and vane pump assembly.

    2. Remove the O-ring.