REAR WIPER MOTOR(for Wagon) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT REAR WIPER MOTOR ASSEMBLY

    1. E278199C01

      *a

      Dot

      Operate the rear wiper motor assembly.

    2. Stop the rear wiper motor assembly operation.

    3. Check the automatic stop position.

      Tip:

      After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      Standard Clearance

      Area

      Measurement

      A

      10.0 mm (0.394 in.)

      OK

      The rear wiper stops at the position shown in the illustration.