STEERING HEATER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL STEERING HEATER SWITCH


    1. B008M02C01
      B008LJK Install in this direction

      for LHD:


      1. Engage the 2 claws to install the steering heater switch to the fuse box opening cover.

    2. B008M34C01
      B008LJK Install in this direction

      for RHD:


      1. Engage the 2 claws to install the steering heater switch to the fuse box opening cover.

  2. INSTALL FUSE BOX OPENING COVER (w/o Knee Airbag)

    Click here

  3. INSTALL FUSE BOX OPENING COVER (w/ Knee Airbag)

    Click here

  4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL (w/o Knee Airbag)

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Knee Airbag)

    Click here

  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  10. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here