ENTRY AND START SYSTEM(for Start Function) DIAGNOSIS SYSTEM

  1. DESCRIPTION

    1. Entry and start system (for Start Function) data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.

  2. CHECK DLC3

    1. Check the DLC3.

      Click here

  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery.