SFI SYSTEM PRECAUTION

  1. INITIALIZATION

    Note:

    • If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System (Refer to the Service Bulletin for Registration).

    • Make sure to perform Reset Memory (CVT initialization) deceleration sensor zero point calibration and CVT oil pressure calibration when replacing the ECM (Click here).

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:

    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One drives the vehicle and the other operates the GTS.

  3. IGNITION SWITCH EXPRESSIONS

    Tip:

    The type of ignition switch used on this model differs depending on the specifications of the vehicle.

    The expressions listed in the table below are used in this section.

    Expression

    Ignition Switch (Position)

    Engine Switch (Condition)

    Ignition switch off

    LOCK

    Off (Lock)

    Ignition switch ACC

    ACC

    On (ACC)

    Ignition switch ON

    ON

    On (IG)

    Engine Start

    START

    On (Start)