ULTRASONIC SENSOR(for Hatchback Rear Side) REMOVAL

PROCEDURE

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 3 ULTRASONIC SENSOR

    1. E262611

      for Back Sensor:

      1. Disengage the clamp.

        Tip:

        This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. E262610

      Disconnect the connector.

      Tip:

      This illustration is for the back sensor LH side or corner sensor RH side. The orientation for the back sensor RH side and corner sensor LH side are the opposite of the back sensor LH side or corner sensor RH side.

    3. E262608

      Disengage the 2 claws to remove the No. 3 ultrasonic sensor.

      Tip:

      This illustration is for the back sensor LH side or corner sensor RH side. The orientation for the back sensor RH side and corner sensor LH side are the opposite of the back sensor LH side or corner sensor RH side.

  3. REMOVE ULTRASONIC SENSOR CLIP

    1. E262609

      Disengage the 2 claws to remove the ultrasonic sensor clip.

      Tip:

      This illustration is for the back sensor LH side or corner sensor RH side. The orientation for the back sensor RH side and corner sensor LH side are the opposite of the back sensor LH side or corner sensor RH side.

  4. REMOVE ULTRASONIC SENSOR BEZEL