OIL LEVEL SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL LEVEL SENSOR

   
   

   1. Install the engine oil level sensor with the 2 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   2. Apply a light coat of engine oil to the O-ring of the engine oil level sensor.

   3. for 2WD:

      
      

      1. Install a new clip to the engine oil level sensor as shown in the illustration.

         Note

         
         

         • Be careful not to allow engine oil to contact the terminals.

         • Do not use a brakes cleaner or a solvent on a connector.

      2. Connect the wire harness with the 2 bolts.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      3. Connect the engine oil level sensor connector.

      4. Connect the crankshaft position sensor connector.

   4. for AWD:

      
      

      1. Install a new clip to the engine oil level sensor as shown in the illustration.

         Note

         
         

         • Be careful not to allow engine oil to contact the terminals.

         • Do not use a brakes cleaner or a solvent on a connector.

      2. Connect the engine oil level sensor connector.

2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

   Click here

3. ADD ENGINE OIL

   Click here

4. INSTALL OIL FILLER CAP ASSEMBLY

   Click here

5. INSPECT FOR OIL LEAK

   Click here

6. INSPECT ENGINE OIL LEVEL

   Click here

7. INSTALL STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY (for AWD)

   Click here

8. INSTALL FRONT SUSPENSION MEMBER BRACE (for AWD)

   Click here

9. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (for AWD)

   Click here

10. INSTALL TRANSMISSION UNDER COVER (for AWD)

    Click here

11. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for AWD)

    Click here

12. INSTALL STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY (for 2WD)

    Click here

13. INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD)

    Click here

14. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD)

    Click here

15. INSTALL TRANSMISSION UNDER COVER (for 2WD)

    Click here

16. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for 2WD)

    Click here