СТАРТЕР (для моделей мощностью 1,7 кВт) СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT FENDER SEAL


    1. Remove the 5 clips and seal.

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

    A01DVK3E01

    1. Выверните 2 болта и отсоедините рабочий цилиндр сцепления в сборе.

  4. REMOVE STARTER ASSEMBLY


    1. A01DZL4E03

      Disconnect the starter connector.

    2. Disconnect the terminal cap.

    3. Remove the nut and disconnect the starter wire.

    4. Remove the 2 bolts and starter.