CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Illuminated Entry or Light Control.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
|---|---|---|---|
| Lighting Time | 15s | A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ON). | 7.5s/15s/30s |
| I/L when ACC OFF | ON | A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR). | ON/OFF |
| I/L ON W/Door Key Unlock | ON | A function that turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR).*1 | ON/OFF |
| Room Light when Aprchd | ON | A function that turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR).*2 | ON/OFF |
| Inside Foot Light | ON | A function that enables or disables the operation of the No. 1 interior illumination light assemblies.*3 | ON/OFF |
| Light Control | ON | A function that illuminates the No. 1 interior illumination light assemblies when the ignition switch is ON and the shift lever is not in P.*3 | ON/OFF |
*1: w/o Entry and Start System
*2: w/ Entry and Start System
*3: w/ No. 1 Interior Illumination Light