REAR SEAT ASSEMBLY(for LH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE

  1. REMOVE REAR SEAT HEADREST ASSEMBLY

    1. Remove the rear seat headrest assembly.

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

    1. Remove the rear seat center headrest assembly.

  3. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

    Click here

  4. REMOVE CENTER ARMREST HINGE COVER RH

    1. B428999N01

      Move the cover in the direction of the arrow (1) to detach the claw.

    2. Move the cover in the direction of the arrow (2) to remove the center armrest hinge cover RH.

  5. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

    1. B336611

      Remove the bolt, washer and rear seat center armrest assembly.

  6. REMOVE REAR SEAT NO. 1 CENTER ARMREST PLATE

    1. B429002

      Remove the rear seat No. 1 center armrest plate.

  7. REMOVE REAR SEATBACK NO. 1 BOARD CAP

    1. B336613C01

      *1

      Protective Tape

      Using a screwdriver, detach the 3 claws to remove the rear seatback No. 1 board cap.

      Tip:

      Tape the screwdriver tip before use.

  8. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    1. B336614

      Remove the 3 screws and reclining adjuster release handle LH.

  9. REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER

    1. B336609

      Detach the 4 claws.

    2. Detach the guide to remove the rear seat No. 3 cushion hinge cover.

  10. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH

    B336610

    1. Detach the 4 claws.

    2. Detach the guide to remove the rear seat lower cushion hinge cover LH.

  11. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    1. B429003

      w/ Seat Heater System:

      1. Disconnect the connector.

      2. Detach the 4 clamps to disconnect the wire harness.

    2. Detach the 22 hooks.

      B429004
    3. B429005

      Remove the 3 hog rings and separate type seat cushion cover with pad from the rear seat cushion frame sub-assembly LH.

  12. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    1. B429007

      Remove the 2 hog rings.

    2. B340576

      Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad LH.

  13. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  14. REMOVE REAR SEATBACK COVER

    1. B336618C01

      *1

      Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

      Tip:

      Tape the screwdriver tip before use.

  15. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH

    1. Detach the cable clamp.

      B429009C01

      *1

      Cable Clamp

      *2

      Cable End

      *3

      Clamp

      -

      -

    2. Disconnect the cable end in the order shown in the illustration.

    3. Remove the 3 clamps to disconnect the No. 2 seat adjuster control cable assembly from the rear seat cushion frame sub-assembly LH.

    4. B429010

      Remove the 4 bolts, 4 bushes and rear seat cushion frame sub-assembly LH.

  16. REMOVE REAR SEATBACK COVER RH

    1. B340578

      w/o Child Restraint System Guide:

      1. Remove the clip and screw.

      2. Using a screwdriver, detach the claw to remove the rear seatback cover RH.

        Tip:

        Tape the screwdriver tip before use.

    2. B429011

      w/ Child Restraint System Guide:

      1. Remove the screw.

      2. Detach the 4 claws to remove the rear seatback cover RH.

  17. REMOVE REAR SEAT COVER

    1. B340579

      w/o Child Restraint System Guide:

      1. Remove the clip and screw.

      2. Using a screwdriver, detach the claw to remove the rear seat cover.

        Tip:

        Tape the screwdriver tip before use.

    2. B429013

      w/ Child Restraint System Guide:

      1. Remove the screw.

      2. Detach the 4 claws to remove the rear seat cover.

  18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH (w/ Child Restraint System Guide)

    1. B429015C01

      *1

      Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback hinge sub-assembly LH.

      Tip:

      Tape the screwdriver tip before use.

  19. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH (w/ Child Restraint System Guide)

    1. B429017C01

      *1

      Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback hinge sub-assembly RH.

      Tip:

      Tape the screwdriver tip before use.

  20. REMOVE REAR SEAT CUSHION MOULDING LH

    1. B340577

      Detach the claw and 3 guides to remove the rear seat cushion moulding LH.

  21. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    B340580C01

    *1

    Clamp

    *2

    Guide

    1. w/ Seat Belt Warning System:

      Detach the 2 clamps to disconnect the wire harness.

    2. Detach the claw and guide to remove the rear seat rear cushion moulding LH.

  22. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    1. B434003C01

      *1

      Cable Clamp A

      *2

      Cable End

      *3

      Clamp

      *4

      Cable Clamp B

      Detach the 2 cable clamps (A).

    2. Disconnect the 2 cable ends in the order shown in the illustration.

    3. Remove the 2 clamps.

    4. Detach the cable clamp (B).

    5. Pass the No. 2 seat adjuster control cable assembly through the hole of the rear seat reclining adjuster assembly LH to remove the No. 2 seat adjuster control cable assembly.

  23. REMOVE REAR SEAT INNER BELT ASSEMBLY LH

    1. B340582

      Remove the bolt and rear seat inner belt assembly LH.

  24. REMOVE REAR NO. 1 SEATBACK ASSEMBLY LH

    1. B340583

      Remove the 3 bolts and rear No. 1 seatback assembly LH from the rear seat reclining adjuster assembly LH.

  25. REMOVE REAR SEATBACK BOARD LH

    1. B429019

      Remove the 6 hog rings.

    2. B429021

      Open the 2 fasteners.

    3. B429023

      Detach the 7 claws.

    4. Move the rear seatback board LH in the direction of the arrow to detach the guide to remove the rear seatback board assembly LH.

  26. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD

    1. B429025

      Detach the 9 hooks.

    2. B340586

      Detach the 8 claws to remove the 4 rear seat headrest supports.

    3. B429026

      Detach the 9 hooks to remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.

  27. REMOVE SEPARATE TYPE REAR SEATBACK COVER

    1. B340588

      Remove the 5 hog rings.

    2. B340589

      Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.

  28. REMOVE REAR SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here