PARK / NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    C193931C26

    *a

    Component without harness connected

    (Park/Neutral Position Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (RB) - 3 (PL)

      Shift lever in P

      Below 1 Ω

      4 (B) - 9 (L)

      Shift lever in P

      Below 1 Ω

      1 (RB) - 2 (RL)

      Shift lever in R

      Below 1 Ω

      1 (RB) - 8 (NL)

      Shift lever in N

      Below 1 Ω

      4 (B) - 9 (L)

      Shift lever in N

      Below 1 Ω

      1 (RB) - 7 (DL)

      Shift lever in D, M, "+" or "-"

      Below 1 Ω

      1 (RB) - 3 (PL)

      Shift lever not in P

      10 kΩ or higher

      4 (B) - 9 (L)

      Shift lever not in P

      10 kΩ or higher

      1 (RB) - 2 (RL)

      Shift lever not in R

      10 kΩ or higher

      1 (RB) - 8 (NL)

      Shift lever not in N

      10 kΩ or higher

      4 (B) - 9 (L)

      Shift lever not in N

      10 kΩ or higher

      1 (RB) - 7 (DL)

      Shift lever not in D, M, "+" or "-"

      10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch assembly.