AIR FUEL RATIO SENSOR(for Sensor 2) INSTALLATION

PROCEDURE

  1. INSTALL AIR FUEL RATIO SENSOR

    Tip:

    Perform "O2 Sensor Learning Value Reset" after replacing the air fuel ratio sensor.

    Click here

    1. A357479C01

      *a

      Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      09224-00011

      Specified tightening torque

      50 N*m

      510 kgf*cm

      37 ft.*lbf

      Note:

      Avoid physical shock to the air fuel ratio sensor connector.

      Tip:

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click hereClick here

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 255 mm (10.04 in.)): 44.7 N*m (456 kgf*cm, 33 ft.*lbf)

    2. Attach the 2 clamps.

    3. A340627C01

      *a

      Air Fuel Ratio Sensor Connector

      *b

      Bracket

      *c

      1.5 mm (0.0591 in.) or less

      Attach the air fuel ratio sensor connector to the bracket as shown in the illustration and connect the air fuel ratio sensor connector.

  2. INSPECT FOR EXHAUST GAS LEAK

    Click here

  3. INSTALL FRONT NO. 2 ENGINE UNDER COVER

    Click hereClick here

  4. PERFORM INITIALIZATION

    1. Perform "O2 Sensor Learning Value Reset" after replacing the air fuel ratio sensor.

      Click here