FUEL SEDIMENTER WARNING SWITCH INSPECTION

PROCEDURE

  1. INSPECT LEVEL WARNING SWITCH

    1. B118232C01

      *a

      Component without harness connected

      (Level Warning Switch)

      Inspect the level warning switch.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Terminals

        Condition

        Resistance

        1 - 2

        Float upper end position

        Below 0.5 Ω

        1 - 2

        Float lower end position

        1 MΩ or higher

        If the result is not as specified, replace the level warning switch.