FRONT BLOWER MOTOR INSTALLATION

PROCEDURE

  1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/o PTC Heater)

    1. E143991

      Install the motor with the 3 screws.

    2. Connect the connector.

  2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/ PTC Heater)

    1. E143990E03

      Install the motor with the 3 screws.

    2. Connect the connector.

    3. Install the quick heater connector screw.

      Table 1. Text in Illustration

      *1

      Quick Heater Connector Screw

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY