POWER SLIDE DOOR MOTOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR DOOR SCUFF PLATE LH


    1. B007R3Z

      Disengage the claw and 12 clips.

    2. Disconnect the connector and remove the rear door scuff plate.

  3. REMOVE SIDE STEP REAR SUPPORT LH

    B007S5A

    1. Remove the 3 bolts and the side step rear support.

  4. REMOVE DOOR CONTROL RELAY ASSEMBLY

    B007PEY

    1. Disconnect the connectors.

    2. Remove the bolt and the door control relay.

  5. SEPARATE REAR NO. 2 DOOR WIRE


    1. B007SI1

      Remove the bolt.

    2. B007VTR

      Disconnect the connector from the vehicle.

  6. REMOVE POWER SLIDE DOOR MOTOR ASSEMBLY


    1. B007T2O

      Remove the 2 bolts.

    2. B007OT4

      Remove the bolt and the slide door lower rail plate.

    3. Remove the slide door lower roller assembly LH from the belt bracket of the power slide door motor assembly.

    4. B007SVF

      Remove the 2 grommets.

    5. B007TDX

      Remove the 10 bolts and the power slide door motor.