MANUAL TRANSMISSION OIL ON-VEHICLE INSPECTION


  1. CHECK TRANSMISSION OIL


    1. B007P4BE01

      Park the vehicle in a level place.

    2. Remove the transmission filler plug and gasket.

    3. Check that the oil surface is within 5 mm (0.20 in.) below the lowest point of the transmission filler plug opening.

      Oil grade
      TOYOTA Genuine Manual Transmission Gear oil API GL-3 (GL-4) or equivalent
      Viscosity
      Above -10°C (14°F): SAE 75W-90, 80W or 80W-90
      Below -10°C (14°F): SAE 75W-90
      Capacity
      2.6 liters (2.7 US qts, 2.3 Imp. qts)

      Note


      • Problems may occur when the oil level is too high or too low.

      • After replacing the oil, drive the vehicle and check the oil level again.

    4. Check for oil leakage if the oil level is low.

    5. Install the transmission filler plug and a new gasket.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }